SMD2018贴片自恢复保险丝

Performance Specification

Model	V _max (V dc)	I_max (A)	I _hold @25°C (A)	I _trip @25°C (A)	P_d Typ. (W)	Maximum Time To Trip		Resistance
Model	V _max (V dc)	I_max (A)	I _hold @25°C (A)	I _trip @25°C (A)	P_d Typ. (W)	Current (A)	Time (Sec)	R i _min (W)	R1max (W)
SMD2018-030SF	60	10	0.30	0.60	0.9	1.5	3.00	0.500	2.300
SMD2018-050SF	60	10	0.55	1.20	1.0	2.5	3.00	0.200	1.000
SMD2018-075SF	60	10	0.75	1.50	1.1	8.0	0.30	0.110	0.630
SMD2018-100SF	15	35	1.10	2.20	1.1	8.0	0.40	0.060	0.360
SMD2018-100SF33V	33	35	1.10	2.20	1.1	8.0	0.40	0.060	0.360
SMD2018-150SF	15	35	1.50	3.00	1.1	8.0	0.80	0.050	0.170
SMD2018-200SF	10	35	2.00	4.00	1.1	8.0	2.40	0.030	0.100

V max = Maximum operating voltage device can withstand without damage at rated current (Imax).

I max = Maximum fault current device can withstand without damage at rated voltage (V max).

I hold = Hold Current. Maximum current device will not trip in 25°C still air.

I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.

Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage.

Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C.

R1max = Maximum device resistance is measured one hour post reflow.

CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.

Environmental Specifications

Test	Conditions	Resistance change
Passive aging	+85°C, 1000 hrs.	±5% typical
Humidity aging	+85°C, 85% R.H. , 168 hours	±5% typical
Thermal shock	+85°C to -40°C, 20 times	±33% typical
Resistance to solvent	MIL-STD-202,Method 215	No change
Vibration	MIL-STD-202,Method 201	No change
Ambient operating conditions : - 40 °C to +85 °C
Maximum surface temperature of the device in the tripped state is 125 °C

Thermal Derading Chart

Recommended Hold Current(A) at Ambient Temperature(°C)

Model	Ambient Operation Temperature
Model	-40°C	-20°C	0°C	25°C	40°C	50°C	60°C	70°C	85°C
SMD2018-030SF	0.48	0.42	0.35	0.30	0.24	0.21	0.17	0.15	0.10
SMD2018-050SF	0.87	0.77	0.67	0.55	0.46	0.41	0.36	0.31	0.23
SMD2018-075SF	1.19	1.05	0.91	0.75	0.61	0.54	0.47	0.41	0.32
SMD2018-100SF	1.71	1.52	1.32	1.10	0.94	0.84	0.74	0.64	0.50
SMD2018-150SF	2.38	2.10	1.82	1.50	1.27	1.13	0.99	0.85	0.64
SMD2018-200SF	2.95	2.65	2.35	2.00	1.74	1.59	1.44	1.29	1.06

Thermal Derating Curve

Average Time-Current Curve

Soldering Parameters

Profile Feature	Pb-Free Assembly
Average Ramp-Up Rate(Ts max to T p)	3℃/second mac.
Preheat -Temperature Min(Ts min) -Temperature Max(Ts max) -Time(Ts min to Ts max)	150℃ 200℃ 60~180 seconds
Time maintained above: -Temperature(TL) -Time(tL)	217℃ 60~150 seconds
Peak Temperature(Tp)	260℃
Ramp-Down Rate	6℃/second max.
Time 25℃ to Peak Temperature	8 minutes max
Storage Condition	0℃~30℃,30%~60%RH

Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free

Recommended maximum paste thickness is 0.25mm

Devices can be cleaned using standard industry methods and solvents.

Note 1:All temperature refer to topside of the package, measured on the package body surface.

Note 2: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements.

Physical Dimensions(mm.)

Model	A		B		C		D	E
Model	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Min.
SMD2018-030SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-050SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-075SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-100SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-100SF33V	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-150SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25
SMD2018-200SF	4.72	5.44	4.22	4.93	0.50	1.20	0.30	0.25

Termination Pad Characteristics

Terminal pad materials：Tin-plated Nickel-Copper

Terminal pad solder ability：Meets EIA specification RS186-9E and ANSI/J-STD-002 Category 3.

Recommended Pad Layout (mm.)

Tape And Reel Specifications (mm)

Governing Specifications		EIA 481-1
W		12.0 ± 0.2
P0		4.0 ± 0.10
P1		8.0 ± 0.10
P2		2.0 ± 0.05
A0		4.40 ± 0.10
B0		5.50 ± 0.10
B1max.		8.20
D0		1.50 + 0.1, -0
F		5.5 ± 0.05
E1		1.75 ± 0.10
E2min.		10.25
T		0.6
T1max.		0.1
K0		1.36 ± 0.1
Leader min.		390
Trailer min.		160
Reel Dimensions
A max.		178
N min.		50
W1		12.4 ± 0.5
W2		18.4 ± 0.5

Storage And Handling
‧ Storage conditions：0℃~30℃, 30%~60% R.H.
‧ Devices may not meet specified performance
if storage conditions are exceeded.

Part Number System

SMD 2018 - 口口口 S F 口口V
special voltage Rating(Optional)

Lead-Free

Tin-plated Nickel-Copper

Holding Current Rating

Device Dimensions: Length/width(Unit:1/100 inch) Size 5045 mm / 2018 inch

Surface Mount Device

2024澳门原料网1688（东莞市富源电子科技有限公司）成立于1998年，主要从事安规元器件生产和销售，通过10年的改革和努力现在的富宽源已经成为集生产和销售为一体的安规元器件总汇；富宽源将继续秉持品质第一、服务客户的原则不断为广大客户提供质优价廉的产品。我公司目前主要提供如下产品: 电流保险丝-CurrentFuse 玻璃管电流保险丝陶瓷管电流保险丝贴片电流保险丝电阻式保险丝微型电流保险丝高压电流保险丝直流电流保险丝交流电流保险丝 SMD-贴片式自恢复保险丝 AI-插件式自恢复保险丝保险丝座-Fuseholder ESTMF系列保险丝座 EDKFH系列保险丝座 SKPTF系列保险丝座 AUTO--汽车保险丝座 OPWOP系列保险丝座拉线盒式保险丝座保险丝夹&端子保险管座保险座大电流|高压保险座温度保险丝-Thermalcutoffs 方块形温度保险丝电阻式温度保险丝大电流温度保险丝陶瓷温度保险丝铁壳温度保险丝 SW.C温度保险丝 NEC温度保险丝艾默生温度保险丝内桥温度保险丝松下温度保险丝 AUPO温度保险丝温度开关/温控器-Thermalprotector 热保护器/可恢复温控器风筒式温控开关/温控器马达热保护器/温控器除霜除湿温控器/温控开关超低温温控开关/温控器微型温控开关/温控器温度开关/温控器-Thermalprotector 7AM/17AM温控器 KSD301系列温开关 KSD-01F插脚温开关 9700系列方块形温控开关 BR系列温控开关 SEKIST-22温控器压敏电阻-Varistors 压敏电阻氧化锌压敏阻器贴片压敏电阻 SMD压敏电阻插件型压敏电阻高能压敏电阻汽车保险丝Autofuse/carfuse 小号汽车插片保险丝FY-MIN 中号汽车插片保险丝FY-ATC 大号汽车插片保险丝FY-MAX 小号叉栓式汽车保险丝FY-UF 大号汽车叉栓式保险丝FY-MF 管状|柱状汽车保险丝其他型号汽车保险丝过载保护器-CIRCUITBREAKER AR1/AR2系列过载保护器 W系列过载保护器 88/88A系列过载保护器 90系列过载保护器 91/91L系列过载保护器 97/98/98H系列过载保护器带开关系列过载保护器热敏电阻-NTC/PTCThermistor 负温度系数热敏电阻陶瓷正温度系数热敏电阻高分子正温度系数热敏电阻温度传感器湿度传感器本公司将继续通过ISO9000质量管理体系的有效实施，使涉及企业生产经营的各个运作环节，均严谨有序，不断制造出质优价廉、适销对路的产品参与市场竞争，使企业长期保持较强的经营获利能力。同时我们将长期重视与行业知名企业合作，争取最大限度的代理权，以最优惠的价钱把产品销售给客户。

<< 上一页：SMD0603贴片自恢复保险丝 || 下一页：没有了 >>